You use the 8 excavator parts bucket tooth 208-70-14152 to make your excavator stronger for hard jobs. This part fits Komatsu PC400 machines. It can also work with other brands. This makes it useful on many construction sites. Reports say its tough design helps you dig into hard dirt and rocks easily. You get good lifting and easy setup. Your work becomes safer and quicker.
Key Takeaways
The 8 excavator parts bucket tooth 208-70-14152 makes your excavator dig better. It works well for hard jobs like breaking tough dirt and moving rocks.
This bucket tooth uses strong alloy steel. It does not wear out fast. It lasts longer when you use it a lot.
You can install it fast and easy. You only need simple tools. You will work more and fix less.
Check and clean the bucket tooth often. This stops expensive repairs. It helps your excavator work well.
Always check the part number before you buy. This makes sure it fits your excavator, especially for Komatsu PC400.
8 excavator parts bucket tooth 208-70-14152 overview
What is it?
You use the 8 excavator parts bucket tooth 208-70-14152 to boost your excavator’s digging power. This part follows the Komatsu style and fits the PC400 model. You can also use it with other brands because of its cross-brand fitment. Many construction workers choose this bucket tooth for tough jobs like breaking hard soil or moving rocks. You get a reliable part that helps your machine work better and last longer.
Tip: If you want a trusted supplier for the bucket tooth 208-70-14152, you should check YNF Machinery. They offer quality parts that match your excavator’s needs.
Design and material
The 8 excavator parts bucket tooth 208-70-14152 has a strong one-piece design. You see a horizontal pin that locks the tooth in place. The larger holes make installation easier and faster. You do not need special tools to attach it. The shape helps your excavator grip the ground and dig deeper.
Manufacturers use high spec alloy steels to make this bucket tooth. This choice gives you excellent wear resistance and strength. You get a part that can handle heavy impacts and tough conditions. The table below shows the mechanical properties of the alloy steel used in the 8 excavator parts bucket tooth 208-70-14152:
Property | Value |
|---|---|
Hardness | 48-52 HRC |
Impact (20℃) | ≥ 20 J |
Impact (-40℃) | ≥ 14 J |
Elongation | ≥ 4 |
Tensile Strength | ≥ 1600 MPa |
Yield Strength | ≥ 950 N/mm² |
You get a bucket tooth that stays sharp and strong even after many hours of digging. The alloy steel resists bending and breaking. You can trust this part to keep your excavator working hard.
When you look at the market, you see that the 8 excavator parts bucket tooth 208-70-14152 is popular with many buyers. The table below shows a typical product listing:
Product Code | Material | Manufacturer | Quantity | Price |
|---|---|---|---|---|
208-70-14152 | Alloy Steel | YNF Machinery | 20 PCE | $216.48 |
You get good value for your money when you choose this part. The design and material make it a smart choice for anyone who wants strong and reliable excavator teeth.
Uses in excavators
Digging and grading
You use your excavator for many tough jobs on a construction site. One of the main tasks is digging. The 8 excavator parts bucket tooth 208-70-14152 helps you break through hard soil, clay, or even rocky ground. You can dig trenches, foundations, and holes with more speed and less effort. This bucket tooth gives your machine a sharp edge, so you move earth quickly and cleanly.
Grading is another important job. You need to level the ground before you build roads or lay foundations. With this bucket tooth, you get smooth and even surfaces. The strong design lets you cut through bumps and high spots. You save time because you do not need to go over the same area many times.
Note: A good bucket tooth makes your excavator more efficient. You finish jobs faster and use less fuel.
Ground engaging tool
You use the bucket tooth as a ground engaging tool. This means it is the first part to touch the soil or rock. The 8 excavator parts bucket tooth 208-70-14152 takes on the hardest work. It protects your bucket from damage and helps your machine last longer.
Here are some ways you use this part as a ground engaging tool:
Breaking up compacted dirt or gravel
Moving large rocks or debris
Digging in frozen or very dry ground
Shaping slopes and ditches
You need a strong and reliable bucket tooth for these jobs. The right part keeps your excavator working at its best. You avoid delays and costly repairs. Many operators choose this model because it stands up to heavy use and tough conditions.
Features and benefits
Durability
You want your excavator to work hard every day. The bucket tooth 208-70-14152 is known for being strong and lasting a long time. It is made from high spec alloy steel, so it does not wear out fast. This helps the tooth stay sharp and keep its shape after digging a lot. Each tooth is made carefully, so it fits well and stays in place when you use it.
You can see how long this bucket tooth lasts when used for tough jobs. The table below shows how long different models last:
Bucket Tooth Model | Average Lifespan (Heavy-Duty Usage) |
|---|---|
208-70-14152 | 9.6 months |
208-70-14152RC | 12.3 months |
This part does not bend or break easily. That means you do not have to stop work for repairs. Many people like this model because it works well with rocks, hard dirt, and debris and does not wear out fast.
Easy installation
You do not want to spend a lot of time changing parts. The bucket tooth 208-70-14152 is easy to put on. It uses a horizontal pin and bigger holes, so you can use normal tools to attach or take it off. You do not need special tools or extra help.
People often say this bucket tooth is simple to install. Here are some things they mention:
You can put the tooth on Komatsu PC400 excavators with basic tools.
The design lets you attach and remove it quickly.
The standard fit and strong steel make it easy to work with.
You save time and energy when you do maintenance. This means your excavator can work more and spend less time getting fixed. A part like this helps you finish your project on time.
Comparison and identification
How to identify
You can spot the right bucket tooth for your excavator by checking a few key details. First, look for the part number stamped or cast into the metal. The number “208-70-14152” should appear clearly on the tooth. This marking helps you avoid mix-ups with similar parts.
Next, measure the tooth. The 208-70-14152 model fits Komatsu PC400 machines, so its size matches the bucket and pin system for that excavator. You will see larger holes for the horizontal pin, which makes installation easier. The shape of the tooth is sharp and slightly curved, designed for tough digging jobs.
Fitment matters when you choose a bucket tooth. The table below shows how the 208-70-14152 compares to other Komatsu models. You can use this table to check which part fits your machine:
Model | Part No. | Description |
|---|---|---|
PC300 | 207-70-14151 | bucket tips |
207-70-14280 | bucket tips | |
207-70-14151RC | bucket tips | |
207-70-14151TL | bucket tips | |
PC400 | 208-70-14152 | bucket tips |
Tip: Always match the part number and dimensions before you buy. YNF Machinery lists these details to help you choose the right part.
Differences from other teeth
You may wonder how the 208-70-14152 stands out from other bucket teeth. The main difference is its size and fitment. This model is larger and stronger than the PC300 series teeth. You get a tooth that handles heavier loads and tougher ground.
Other bucket teeth, like the 207-70-14151, fit smaller machines and may not last as long in rocky soil. The 208-70-14152 uses high spec alloy steel, so it resists wear and stays sharp longer. You also get easier installation because of the bigger pin holes.
Choose the 208-70-14152 when you need extra strength for deep digging or heavy-duty grading. If you work with Komatsu PC400 or similar excavators, this model gives you better performance and longer life. For lighter jobs or smaller machines, you can pick a different tooth.
Note: Picking the right bucket tooth helps your excavator work better and saves you money on repairs.
Installation and maintenance
How to install
You can install a bucket tooth on your excavator with a few simple steps. Start by making sure you have the right part and tools. You need the bucket tooth, a horizontal pin, and a hammer. Always wear gloves and safety glasses.
Clean the area where you will attach the tooth. Remove dirt and old grease.
Line up the bucket tooth with the mounting holes on the bucket.
Slide the horizontal pin through the holes in the tooth and bucket.
Tap the pin gently with a hammer until it sits firmly in place.
Check that the tooth feels secure. Wiggle it to make sure it does not move.
Tip: If you use a Komatsu PC400 excavator, the 8 excavator parts bucket tooth 208-70-14152 fits perfectly. YNF Machinery supplies this part and the correct pins.
Maintenance tips
You want your bucket tooth to last as long as possible. Good maintenance helps you avoid breakdowns and saves money. Follow these practices to keep your bucket tooth in top shape:
Inspect the tooth regularly for cracks, chips, or bending.
Clean the tooth after each job to remove dirt and rocks. This prevents material buildup.
Store spare teeth in a dry place to avoid rust.
Handle the tooth carefully when installing or removing it.
Replace the tooth if you see deep wear or if it becomes loose.
A table below shows common signs of wear and what you should do:
Sign of Wear | What You Should Do |
|---|---|
Cracks | Replace the tooth |
Chips | Replace the tooth |
Loose fit | Check pin and holes |
Rust | Clean and store better |
Regular care keeps your excavator working smoothly. You finish jobs faster and avoid costly repairs.
You learned how the bucket tooth 208-70-14152 helps your excavator work harder and last longer. This part fits Komatsu PC400 and other machines. You get strong alloy steel, easy installation, and reliable performance.
Always check the part number before you buy.
Install the tooth correctly for best results.
Keep the tooth clean and inspect it often.
For trusted parts, choose YNF Machinery. Proper care keeps your excavator safe and efficient.
FAQ
How do you know if the 208-70-14152 bucket tooth fits your excavator?
Check the part number on your old tooth or in your machine’s manual. The 208-70-14152 fits Komatsu PC400 and similar models. You can also ask YNF Machinery for help with fitment.
How often should you replace your bucket tooth?
Replace your bucket tooth when you see deep wear, cracks, or if it feels loose. Most users change teeth every 9 to 12 months during heavy use. Regular checks help you avoid sudden breakdowns.
Can you install the bucket tooth by yourself?
Yes, you can install it with basic tools. Use gloves and safety glasses. Follow the steps in this blog. The design makes installation quick and easy for one person.
Where can you buy genuine 208-70-14152 bucket teeth?
You can buy genuine 208-70-14152 bucket teeth from YNF Machinery. They offer quality parts and helpful support. Always check the part number before you order.
What makes the 208-70-14152 bucket tooth last longer?
Manufacturers use high-quality alloy steel for this tooth. The strong design resists bending and breaking. Regular cleaning and inspection also help you get the most life from your bucket tooth.
