Choosing the right kobelco excavator engine parts helps your machine work well. If you use wrong or fake parts, your kobelco excavator can get damaged. Picking the right parts keeps your excavator safe and saves money on repairs. You will see how being careful gives better results and less problems.
Key Takeaways
Find your Kobelco excavator’s model and serial number. This helps you get the right parts for your machine.
Use official parts catalogs to look for engine parts. These catalogs show pictures and lists to help you match parts.
Check OEM codes and technical details before you buy. This stops mistakes and makes sure the parts work well with your excavator.
Pick genuine Kobelco parts instead of aftermarket ones. Real parts have better quality, fit, and warranty, so you save money later.
Buy parts from trusted sellers. Look for good reviews and warranty to make sure you get real parts and good service.
Identify Your Kobelco Excavator
Find Model and Serial Number
You must find the model and serial number first. These numbers tell you which kobelco excavator parts fit your machine. Most kobelco excavators have the serial number under the door on the side. If your machine is newer than 2013, you can also find the VIN number. Look for it on the right side outside the driver’s cab, just below the window. The table below shows where to look for these numbers on different models:
Model/Type | Serial Number Location | VIN Number Location |
|---|---|---|
17SR | Under door on side of machine | Right side exterior of driver’s cab below the window (2013 and newer) |
50SR | Under door on side of machine | Right side exterior of driver’s cab below the window (2013 and newer) |
ED150 | Under door on side of machine | Right side exterior of driver’s cab below the window (2013 and newer) |
SK130 | Under door on side of machine | Right side exterior of driver’s cab below the window (2013 and newer) |
… | … | … |
Tip: Clean the area before you look for these numbers. Dirt or paint can cover them up.
Importance of Accurate Identification
It is very important to get the right model and serial number. If you use the wrong numbers, you might buy kobelco excavator parts that do not fit. This can waste your time and money. You might have to stop working and lose time. Here is why getting the right numbers matters:
You do not make expensive mistakes or wait longer for repairs.
You save time and do not spend extra money.
You keep your excavator working and protect your company’s name.
You make sure the parts fit, so you do not waste anything.
When you know your model and serial number, you can get the right kobelco excavator parts. This helps your excavator work well and last longer.
Use Kobelco Excavator Parts Catalogs
Consult Parts Diagrams
You should use official parts catalogs to find engine parts. These catalogs have clear diagrams and lists for each model. When you enter your model and serial number, you see all the parts that fit. Online resources can help make this easier. The table below shows some useful resources:
Resource Name | Description |
|---|---|
Kobelco Parts Catalog | Enter your model number and pick the serial number. |
Serial Number Location | Find out where to look for the serial number. |
Kobelco Parts Books | Links to full parts books for Kobelco equipment. |
Tip: Always look at the diagrams in the official parts catalogs before you order. Diagrams show how each part fits and works with your engine.
Match Engine Parts
You need to match engine parts using OEM codes and part numbers. These numbers help you get the exact part for your Kobelco excavator. Follow these steps to avoid mistakes:
Write down the OEM codes and part numbers from your manual.
Check the diagrams in the official parts catalogs for the same numbers.
Compare the part numbers from your manual with the seller’s list.
If you need help, use the online catalog or ask a team to help you check part numbers.
When you use official parts catalogs and check OEM codes, you lower the chance of buying the wrong part. You keep your excavator working well and avoid expensive repairs. You also save time because you do not need to return parts or wait for new ones.
Note: Always double-check the part numbers before you buy. This step helps you avoid delays and keeps your machine running.
Check Kobelco Excavator Engine Parts Compatibility
Verify OEM Codes
You must check that the OEM codes match your machine. OEM codes help you find the right kobelco excavator engine parts. If you skip this, you might buy the wrong kobelco excavator parts. This can cause problems and waste your money.
Here are steps to check if the OEM code matches:
Write down your machine’s model, serial number, and year. You can find these on the identification plate.
Open the official OEM parts catalog for your kobelco excavator.
Look at the diagrams and find the item callouts. Match the part numbers in the list with the diagram.
See if the part number matches your machine’s details. Check the size and fit to make sure the part is right.
Tip: Always compare the OEM code from your manual with the code in the catalog. This helps you avoid mistakes and keeps your excavator working well.
If you see a part number that does not match, do not order it. Double-check everything before you buy. This step protects your machine and helps you avoid downtime.
Confirm Specifications
After you check the OEM code, look at the technical specifications for the kobelco excavator parts. Each engine part must match your machine’s needs. If you use the wrong part, your excavator might not work or could break.
Here is a table of important specifications to check before you buy:
Specification | Value |
|---|---|
Operating Weight | 13,000 – 13,300 Kg |
Ground Pressure | 41 – 30 kPa |
Shoe Width | 500 – 700 mm |
Pump Type | Two variable displacement pumps + one gear pump |
Max. Discharge Flow | 2 x 130.4, 1 x 20 L/min |
Relief Valve Setting | 34.3 MPa |
Engine Model | ISUZU 4JJ1 |
Rated Power Output | 73.0 kW at 2,000 RPM |
Max. Torque | 365 N.m at 1,600 RPM |
Displacement | 2,999 ml |
Fuel Tank | 271 L |
You should check compatibility and specifications for every part you order. If you ignore these, you risk engine parts failure. Common reasons for failure are fuel injection system problems, EGR system malfunctions, and ECU system issues. These problems can cause fault codes like P0540 (preheating device failure), P0617 (start switch circuit failure), or P0217 (overheating).
Fuel injection system failures can stop your engine.
EGR system malfunctions can cause pollution and poor performance.
ECU system issues can prevent your excavator from starting.
Note: Always match the specifications in the table with your machine’s manual. If you see any differences, ask an expert before you buy.
By checking both the OEM codes and the technical specifications, you make sure your kobelco excavator parts fit well. This keeps your machine safe, reliable, and working for a long time.
Choose Genuine Kobelco Parts or Aftermarket
Compare OEM and Aftermarket
You need to pick between genuine kobelco parts or aftermarket parts. Genuine kobelco parts fit your machine just right. They work well and last a long time. You get a warranty with them. This helps if something breaks. Genuine kobelco parts can help your machine keep its value. This is good if you want to sell it later.
Aftermarket parts usually cost less money. Their quality is not always the same. Some aftermarket parts do not fit well. Some do not last as long. This can cause engine problems or more repairs. If you use non-OEM parts, your machine may use more fuel. It might not work as well. Bad parts can make your engine work harder. This means you spend more on fuel and repairs.
Here is a table that shows the main differences:
Feature | Genuine Kobelco Parts | Aftermarket Parts |
|---|---|---|
Warranty Coverage | Full four-year or 4,000-hour warranty | Limited or no warranty |
Support Services | Dedicated support and stocked parts warehouse | Varies by supplier |
Extended Warranty | Available | Rarely available |
Performance | Reliable, perfect fit, better resale value | Quality varies, may cause issues |
Tip: Genuine kobelco parts help your machine work well. They save you money in the long run.
Spot Counterfeit Parts
Fake parts can look real but break fast. You can find real kobelco parts by checking a few things:
The box should be strong and printed clearly. Look for seals or holograms.
Real parts come with receipts and forms.
Each part has its own serial number or code. You can check this number online.
Genuine kobelco parts always have warranty papers.
Customer reviews can show if a seller is good.
If you see weak boxes, missing papers, or no warranty, do not buy those parts. Always check these things before you buy kobelco excavator parts.
Buy from Trusted Suppliers
Evaluate Supplier Reputation
Pick a supplier with a good reputation. This helps you get the right parts for your Kobelco excavator. Trusted suppliers have new, used, and rebuilt parts. You can choose what fits your needs and budget. Good suppliers give clear details about their products. They also have many positive customer reviews. Reliable suppliers show certifications. They answer your questions about replacement parts.
Check if the supplier gives a warranty before you buy. A warranty protects you if something breaks. Ask about delivery times too. Most suppliers ship in-stock parts within 3 days after payment. If the part is not in stock, it may take about 10 days to arrive.
Stock Status | Delivery Time |
|---|---|
In Stock | Within 3 days after payment |
Not in Stock | About 10 days |
Tip: Always ask for proof that the kobelco parts are real. Check for warranty papers before you buy.
Installation and Maintenance Tips
Installing parts the right way helps them last longer. Follow the manual step by step when you put in engine parts. If you are not sure, ask a professional for help. After you install the parts, keep your excavator in good shape with these tips:
Clean coolers, filters, and fans often. This keeps your engine running well.
Change filters on time to stop problems.
Check the engine compartment often. Look at oil and coolant levels.
Inspect the radiator and v-belt for damage.
Watch for leaks in hoses, actuators, and pipes.
Look for rust and wear during regular checks.
Watch for signs that your parts need help:
The engine loses power or is hard to start
You hear strange sounds, feel shaking, or see overheating
There is too much smoke from the exhaust
If you see any of these problems, check your replacement parts right away. Fixing issues early can stop bigger problems. This keeps your excavator working well.
Picking the right kobelco excavator engine parts keeps your machine safe. It also helps your machine work well every day. First, you need to know your model and serial number. Use official guides and trusted sellers to help you. Trusted sellers make sure you do not get fake or wrong parts. They know how to find the right kobelco excavator engine parts for your machine. Using real parts and checking your engine often stops damage. This keeps your equipment strong and reliable. If you act early, you can avoid mistakes. Your excavator will keep working its best.
FAQ
What should you do if you cannot find your Kobelco excavator’s serial number?
Look near the cab or under the door on the frame. Wipe the area clean to see the numbers. If you still cannot find it, check your owner’s manual. You can also ask YNF Machinery for help.
How can you tell if a Kobelco engine part is genuine?
Check for a clear serial number on the part. The box should be strong and not damaged. Warranty papers should come with the part. YNF Machinery always gives these things with real parts. You can look up the code online or ask YNF Machinery to check it.
Can you use aftermarket parts for your Kobelco excavator?
Aftermarket parts can be used, but they may not fit well. They might not last as long as genuine parts. Genuine parts from YNF Machinery work better and have a warranty.
What should you check before installing new engine parts?
Read your manual and check the part numbers. Look at the part to see if it is damaged. Make sure the part matches your machine’s needs. If you are not sure, ask YNF Machinery for help.
Where can you buy reliable Kobelco excavator engine parts?
You can get good engine parts from YNF Machinery. They sell new, used, and rebuilt parts. You get a warranty and expert help when you buy from them.
