You see the 19570RC casting excavator bucket tooth as an important tool. This part helps your excavator dig into hard ground easily. Its chisel-shaped tip lets you dig better and deeper. When you work in hard rock, you use the 19570RC casting excavator spare parts – bucket tooth for strength. The special design helps you do tough digging jobs without worry.
Key Takeaways
The 19570RC bucket tooth is made from strong alloy steel. This makes it last longer and not wear out fast. You will not need to replace or fix it often.
Its chisel-shaped design helps it dig hard ground easily. You get better control and finish work faster. This makes your job easier and quicker.
The smooth tip cuts down on resistance. Your excavator uses less fuel and works faster. This helps you save money over time.
This bucket tooth works well for hard jobs like digging rocks, mining, and building. It gives good results even when the work is tough.
Always look at your excavator’s manual before you buy a bucket tooth. This helps you make sure it fits your machine the right way.
Features
Material and Durability
When you choose a bucket tooth for your excavator, you want it to last through tough jobs. The 19570rc casting excavator spare parts – bucket tooth uses high-quality alloy steel. This material gives you both hardness and strength. You can see how it compares in the table below:
Material | Hardness HRC | Tensile Strength (MPa) |
|---|---|---|
Alloy Steel | 48-52 | ≧1372 |
Alloy steel stands out because it resists wear and handles heavy pressure. You can trust this bucket tooth to keep its shape and sharpness, even when you dig in hard rock or abrasive soil. This means you spend less time and money on replacements.
Chisel-Shaped Design
The chisel-shaped design helps you break into tough ground with less effort. When you use the 19570rc casting excavator spare parts – bucket tooth, the sharp edge cuts through rock and compacted soil. This shape gives you better control and lets you dig more precisely. You can finish your work faster and with cleaner results. The chisel shape also helps the tooth stay sharp longer, so you get steady performance on every job.
Streamlined Tip
The streamlined tip makes your excavator more efficient. You will notice several benefits when you use this design:
The tip reduces resistance as you dig, so your machine uses less fuel.
You can finish tasks faster because the tooth moves through the ground more easily.
Lower fuel use means you save money over time.
Tip: A streamlined tip not only saves fuel but also helps your excavator work smoothly in tough conditions.
The 19570rc casting excavator spare parts – bucket tooth combines strong materials, a smart chisel shape, and a streamlined tip. You get a tool that lasts longer, works harder, and helps you save on costs.
Applications
Hard Rock Excavation
You often face tough ground when you work with excavators. Hard rock can slow down your progress and wear out your tools quickly. The 19570rc casting excavator spare parts – bucket tooth helps you break through these obstacles. Its strong alloy steel and chisel-shaped tip let you dig into massive hard rocks with less effort. You get better penetration and faster results. The tooth keeps its sharpness, so you do not need to stop and replace it often. This means you finish your projects on time and save money.
Tip: When you use a bucket tooth designed for hard rock, you reduce machine stress and improve safety on the job site.
Mining and Construction
Mining and construction sites demand reliable tools. You need bucket teeth that can handle heavy loads and constant use. The RC type bucket tooth stands out for these jobs. It is built for digging massive hard rocks, while other types serve different needs:
RC type: Best for hard rock excavation.
Flat-head type: Good for general digging in sand and surface soil.
L type: Used for coal seam excavation.
TL type: Helps produce larger coal lumps.
You should choose the RC type when you want strength and durability in mining and construction. The 19570rc casting excavator spare parts – bucket tooth gives you the power to dig deep and move materials quickly. You can trust it for precision tasks, such as trenching or foundation work, where accuracy matters.
Abrasive Environments
Abrasive soils and rocky terrain can wear down your equipment fast. You need a bucket tooth that resists damage and keeps working. The 19570rc casting excavator spare parts – bucket tooth uses high-quality alloy steel, which stands up to harsh conditions. Its streamlined tip reduces friction, so you use less fuel and keep your machine running smoothly. You get steady performance, even when you dig in gravel, crushed stone, or other abrasive materials.
Note: Choosing the right bucket tooth for abrasive environments helps you avoid costly repairs and downtime.
You can rely on the 19570rc casting excavator spare parts – bucket tooth for tough jobs. It works well in hard rock, mining, construction, and abrasive soils. You get a tool that lasts longer and helps you complete your work with confidence.
19570RC Casting Excavator Spare Parts – Bucket Tooth Compatibility
Compatible Models
You need the right bucket tooth for your excavator. The 19570rc casting excavator spare parts – bucket tooth fits many machines. You can use it with Komatsu PC200 and PC1250. These machines are common at building and mining sites. Using the correct tooth helps your excavator work better and last longer.
Tip: Always look in your excavator’s manual for the model number before you buy new bucket teeth.
Configurations
There are different ways to set up your bucket teeth. Each setup changes how your excavator works. The table below shows some choices and their main features:
Product Name | Price Range | Key Attributes |
|---|---|---|
PC200 Bucket Teeth 205-70-19570 | $0.60-1.20/kg | High-volume discounts, precision casting |
Bonovo Customized Bucket Ripper with Twin Teeth | $5,700 | Dual-tooth configuration, quarry optimized |
YASSIAN PC1250 Bucket with Teeth | $60 | ISO-compliant, high chromium content |
HONGWING Rock Bucket with Teeth | $2,870 | Mining-grade, abrasion-resistant |
You can pick single-tooth or twin-tooth setups. Twin teeth are good for quarries and hard rock. ISO-compliant teeth are strong and last a long time. Mining-grade teeth are tough and resist damage. Picking the right setup helps you dig faster and keeps your tools from wearing out quickly.
Installation
You can put on a new bucket tooth with simple tools. First, take off the old tooth from the adapter. Then, clean the adapter and check if it is damaged. Slide the new tooth onto the adapter and lock it with a pin or bolt. Make sure the tooth is tight. Check your bucket teeth often to spot problems early and keep your machine safe.
Note: If you need help putting on a new tooth or want tips about care, YNF Machinery can help with all 19570rc casting excavator spare parts – bucket tooth products.
You can change your bucket tooth for special jobs. Some teeth have extra coatings to last longer. Others have special shapes to dig faster. When you pick the right model and setup, your work gets easier and better.
Benefits
Performance
You want your excavator to do tough jobs fast. The right bucket tooth helps you dig deeper and move more dirt. The chisel-shaped tip and strong alloy steel help you break hard ground. Your machine does not wear out as quickly. It runs smoother and uses less energy. You can count on your excavator, even in rocky or rough soil.
You dig faster.
You get better accuracy for trenching and foundations.
You spend less time fixing your machine.
Tip: Check your bucket teeth often to keep your excavator working well.
Cost-Effectiveness
It is important to save money on every job. A strong bucket tooth means you do not buy new ones often. The tough material keeps it from breaking, so you fix it less. The streamlined tip helps your machine use less fuel. These savings grow over time.
You pay less for fuel.
You do not need as many new teeth.
You spend less on repairs.
Buying good parts helps your budget. YNF Machinery has strong options to help you save money and keep your excavator working.
Industry Standards
You want to know your bucket tooth is made to high standards. Companies test and certify these parts so they last and work well. Many, like the Komatsu 205-70-19570RC, use alloy steel and have ISO9001 certification. This means you get a safe and strong tool.
Product Description | Material | Surface Hardness | Certification |
|---|---|---|---|
PC200 Excavator Standard Bucket Teeth 205-70-19570 | Alloy Steel | 48-52HRC | ISO9001:2008 |
Product Description | Certification |
|---|---|
Forging Craft Good Quality for Komatsu 205-70-19570RC | ISO9001: 2000 |
Note: Using certified parts helps you follow safety rules and makes sure your machine works right.
You can trust bucket teeth that meet industry standards. This helps you feel safe and finish your work the right way.
You get strong digging and long use with the 19570RC casting excavator bucket tooth. The chisel-shaped design and hard alloy steel help with tough jobs. Many workers pick this part for hard work, as you can see below:
Attribute | Details |
|---|---|
Product Name | Getplus Bucket Teeth 205-70-19570RC PC200rcf Rock Chisel |
Price | US$10.40 (100-499 Pieces) |
Customization | Available |
After-sales Service | Reply in 24 Hours |
Warranty | One Year |
When you choose bucket teeth, you should:
Make sure they are good quality and fit your machine.
Check for certifications and a warranty.
Buy from trusted sellers like YNF Machinery.
Picking the right bucket tooth helps your excavator work well and last longer.
FAQ
What makes the 19570RC bucket tooth different from other types?
You get a chisel-shaped tip and strong alloy steel. This design helps you dig into hard rock with less effort. The streamlined tip also saves fuel.
How do you know if the 19570RC bucket tooth fits your excavator?
Check your excavator’s manual for the model number. The 19570RC fits Komatsu PC200 and PC1250. You can ask YNF Machinery for help if you are unsure.
How often should you replace your bucket tooth?
You should check your bucket tooth after each big job. Replace it when you see cracks, chips, or if it looks worn down. Regular checks keep your machine safe.
Can you install the 19570RC bucket tooth by yourself?
Yes, you can install it with basic tools. Remove the old tooth, clean the adapter, and lock the new tooth in place. YNF Machinery can give you tips if you need help.
Where can you buy genuine 19570RC bucket teeth?
You can buy genuine 19570RC bucket teeth from YNF Machinery. They offer certified products, fast replies, and a warranty for your peace of mind.
